SERVICES

BATTERIES

CHARGERS

RENTAL-RECONDITIONED EQUIPMENT

WATERING SYSTEMS

SAFETY EQUIPMENT

PARTNERS

We will recycle your scrap forklift battery! We will recycle your scrap battery!

Refurbished Forklift Batteries.

Forklift Battery Handling Equipment

Materials Handling Equipment Rental

Midwest Power Industries is your source for all your battery handling rental needs.  From battery stations for your battery room to portable battery changers, MPI’s fleet of rental equipment is just a phone call away.  Short or long term rentals are available and will ship to your site within 24 hours.  Delivery and set-up is also available.
Midwest Power Industries rental equipment will help your facility stay up and running with minimal lost time.  Call our service department to speak with one of our experienced staff members for a quote and availability.  We will listen to you and help you solve your facilities problems quickly.  From one week, to one month or longer, MPI can handle your rental needs.

 Midwest Power Industries materials handling equipment rental is ready for your needs.

Please contact sales@midwestpowerindustries.com or call us for quotes and availability

 

Attach A Puller Battery Transporter.Attach-A-Puller Battery Transporter
Turns a pallet jack into a portable battery changer

The ABP is an economical attachment for a pallet jack. Powered from the pallet jack battery and limited to the host truck’s height capability, the ABP is a safe, affordable and flexible small fleet battery changer.
Capacity is based on the pallet jack load capacity and overall fork length. (refer to spec sheet.)

 

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Walk A Puller Battery Changer.Walk-A-Puller Battery Changer
The Economical Battery Changer


The WBP is a completely portable battery changer for the small fleet with a variety of battery compartment heights up to 27".
The Walk-A-Puller (WBP) is designed handle a wide variety of lift truck and motive power applications from the low profile AGV batteries to the high capacity turret trucks and counter balance trucks.

The WBP combines its own power and drive unit, carriage assembly and - attachment system to give you a portable, but complete, heavy-duty battery handler. The unit's ease of operation allows qualified lift truck operators to safely and easily change their own lift truck batteries. The Walk-A-Puller is recommended for those applications requiring 20 to 40 battery changes per day where battery compartment height variation is greater than 6" or over 12" above the floor. Two WBP models are available to meet virtually any battery handling need. For more information, contact your authorized MTC sales representative and ask for our current WBP specification sheet.

Choose the only full-featured portable battery changer in the industry.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.
Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Battery Transporter.Battery Transporter with Mechanical Loader
Taking Charge of Your Changing Needs

MTC’s non-powered battery changer is designed for smaller lift truck fleets that need easier battery changing.

The BT Series Battery Transporter is the ideal battery handler for facilities with relatively small lift truck fleets.  
 
This stout little machine can handle batteries weighing up to 3,000 lbs., and is available in manually powered and electrically powered models. The numerous configurations and options available for this unit allow you to tailor the battery transporter to meet your specific needs and applications.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.
Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Single Level Power Changers.Single-Level Power Changers™

This is the perfect machine for those facilities requiring 10-100 lift truck battery changes per day. With two compartments, the Power Changer™ Series lets you make the maximum use of your rack space while operators remove and replace batteries quickly and efficiently.

This medium volume changer is equipped with a 5-HP motor and is capable of loaded travel speeds ranging from 0-150 fpm. The variable-speed electric drive of this changer allows for fast, efficient battery changes that average less than 2 minutes. This changer is also equipped with a powerful vacuum extraction system that allows for battery attachment. The exclusive carriage assures positive leveling regardless of battery load distribution. By eliminating the safety concerns and labor costs involved with overhead battery systems, this machine can easily justify its existence in any facility.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

PCE Multi-Stacking Power Changers.PCE Multi-Stacking Power Changers

The PCE series battery puller utilizes three separate power systems, all working together to create optimum performance. The first system is an AC controlled gear reduction drive system. This system incorporates a computerized SEW Eurodrive™ motor inverter that controls braking, drive speeds, and torque settings.

The raise/lower power system of the PCE uses two additional Eurodrive™ motors (running in parallel) to raise and lower the carriage on the four point rack and pinion upright system. The final power system drives the hydraulic components of the unit such as the carriage conveyors and pivot arm assembly. By using its three power units together, the PCE is able to offer 100% true multi-function control.

This control means that the operator can travel, raise the carriage, and manipulate the vacuum arm simultaneously without any loss of performance.

The PCE is also the only battery puller designed to expand with your growing needs. This unit has the ability to be converted from a double stacking machine all the way up to a six high machine.

The multi-function center joystick on the PCE’s control panel allows the operator to move the vacuum pivot arm in eight directions as well as control left and right vacuum suction. If a hydraulic extension arm is required for your application, the extension arm controls are also integrated into the center joystick.

The carriage roller conveyors are also controlled with a joystick on the control panel. This new joystick is much more intuitive for new and old users alike.

The PLC controlled battery safety lock system prevents the operator from discharging a battery off the carriage unintentionally. This unique lockout system utilizes four polarized retro-reflective photo eyes and a small PLC controller that monitors the position of the battery and forces the operator to make the decision as to whether or not to discharge the battery from the carriage.

The dead-man operator platform of the PCE allows full access to the control panel and allows operators to easily position themselves during each battery change. The platform is also equipped with two limit switches that prevent operation of the battery puller unless the operator is standing on the platform.

This high capacity machine is designed for a duty cycle of up to 300 battery changes per day or 5,500 hours per year. The PCE requires scheduled preventive maintenance which should be performed by factory trained individuals. The specific maintenance intervals are outlined in the parts and service manual.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

PCHE Multi-Level Power Changers.PCHE Multi-Level Power Changers

The PCHE Series Multi-Level Power Changer™ is designed for high-capacity applications requiring 20-250 battery changes per day. The simultaneous travel and lift functions allow for fast, efficient battery changes that average less than two minutes.

A 7.5-HP electric drive motor generates a travel speed of up to 225 fpm on this machine. The electric drive system replaces the hydraulic drive altogether with a new Movitrac AC brake motor controller and a sealed gearbox. This super-smooth, reliable SEW Eurodrive system is the same type utilized on the PCE systems.

By separating the drive system from the lift system a lifting speed of 24 fpm can also be attained. This is one reason why the PCHE multi-level model is among the most efficient machines on the market today.

The 8” X 12 ½” tubular uprights, unyielding frame, double-80 leveling chains, and sturdy roller carriage make the PCHE stand out above any other multi-level battery changer on the market. In high usage and high abuse applications, there is no comparison to the PCH other than MTC’s own model PCE.

Safety is designed into all aspects of the multi-level Power Changer™. The standard PLC controlled battery safety lock system prevents the operator from discharging a battery off the carriage unintentionally. This unique lockout system utilizes four polarized retro-reflective photo eyes and a small PLC controller to monitor the position of the battery in the carriage. This type of system forces the operator to decide when it is safe to discharge a battery from the carriage.

Another safety feature of the multi-level Power Changer™ is the dead-man operator platform. This platform allows full access to the control panel and allows the operator complete freedom of movement during each battery change. The floor of the platform is cushioned with anti-slip padding, and handholds are provided for the operator to use during battery changes.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.
Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page 

 

Intella Changer.Intell-A-Changer

The Intell-A-Changer is designed to change batteries in Automatic Guided Vehicles (AGVs), Laser Guided Vehicles (LGVs), and forklifts. The Intell-A-Changer makes it possible for AGVs and forklifts to stay on the floor longer.

The MTC Intell-A-Changer is the next-generation, fully automated battery changing system that allows you to execute flawless battery changes every time. This is an all-electric changer, using no hydraulics, that utilizes an Allen-Bradley Con- trolLogix PLC that controls seven SEW-Eurodrive inverters and motors. Encoders inform the PLC about such things as carriage height, arm travel, and arm movements. It utilizes a laser for down-aisle position sensing.

Travelling at a speed of 300 fpm, and with a lift speed of 45 fpm, the Intell-A-Changer will change a battery without an operator! At the start of the twenty-first century, it is undoubtedly the most efficient battery changer ever built with the ability to store batteries at multiple levels.

MTC's all new Intell-A-Changer is the most comprehensive solution for managing batteries and cost. When combined with the E-Batt Battery Management System from EBatt Systems, the Intell-A-Changer brings the future of battery changing into focus today. This system is all about moving products safely and efficiently and with reduced manpower.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page 

 

Hydraulic Traveling Gantry Crane System.Hydraulic Traveling Gantry Crane System

The PowerCrane is designed specifically for changing batteries in sit down riders and other types of lift trucks that do not allow for side extraction.

The HTG Hydraulic Traveling Gantry Crane is the ideal system when battery changing must be done from overhead. The HTG offers six-way motion at a fraction of the cost of a bridge crane and is easy to assemble and install. As with most MTC battery changing systems, the HTG can be easily expanded as your lift truck fleet grows.

The hydraulic power unit provides positive soft starts and stops for safety and control while batteries are being changed. Non-powered, track-guided, and portable gantry cranes with hoists are also available.

The unique design of the PowerCrane system offers three significant advantages. First the modular design of the system allows for easy expansion as your battery handling needs grow. Second, the fine-tuned operating speeds of both the crane and the hoist allow the PowerCrane to provide a safe and efficient battery change. Finally, the numerous configurations and options available for the PowerCrane permit the design of an overhead battery system that specifically meets your needs.

119 1/2" Clear Under Beam (Less Hoist);
Travel Speed = 29 FPM; Dual Drive Motors

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Electric Chain Hoist.Electric Chain Hoist

Motorized trolley and six-button control pendant are required with the HTG series gantry cranes. Buttons operate: up/down, left/right trolley travel and forward/reverse crane travel.
Desired primary three phase voltage: 208, 230, 460, 575


Visit
www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.
Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Battery Station with Acid-Resistant Interlay.Battery Station with Acid-Resistant Interlay

Hardwood Charging Station with Top Charger Shelf; 40 1/2" Depth
Meets OSHA requirements.
Battery Stations available less charger shelf. Add “-LCS” to model number.
Safety Note:
Specify interlay to run left to right for batteries 12" or less in width. Add "-LR" to model number.

Interlay runs left to right (standard)
Available with left to right interlay
1600lb. capacity charger shelf standard

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Overhead Transporter with Acid-Resistant Interlay.Overhead Transporter with Acid-Resistant Interlay

Meets OSHA requirements.
Battery Stations available less charger shelf. Add "-LCS" to model number.
"R" refers to the desired height of rollers above floor. PLEASE SPECIFY with a minimum of 6".

All dimensions shown are nominal and subject to change

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Automatic Battery Wash Cabinets.Automatic Battery Wash Cabinets

Prevent buildup of acid on batteries for reduced maintenance and longer life

With all stainless steel construction, MTC Wash Cabinets are designed for long-lasting dependability. The rollers’ stainless steel shafts rotate in the Nelsonized® hardwood bearing frame that eliminates roller bearings in the harsh cleaning environment of the wash cabinet.

The two panel door makes these cabinets fit into areas with overhead obstructions as low as 9 feet. The new door is easy to maintain and the multi-directional air and water nozzles let you adjust for the variety of batteries in your facility

MTC’s Battery Wash Cabinet combines with the Recirculating Water System to form a complete, closed-loop battery cleaning system.

When combined with an H20 Water Recirculation Unit, MTC Battery Wash Cabinets complete the formation of a closed loop system that contains and controls the water used for cleaning lift truck batteries. While the MTC Wash Cabinet keeps your batteries clean, the H20 Recirculation Unit filters, analyzes, and neutralizes the used wash water. This system not only helps reduce your lift truck and battery maintenance costs, it helps you manage the environmental concerns of battery cleaning.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Battery Wash Racks.Battery Wash Racks

An economical and effective way to keep industrial lift truck batteries clean.

MTC’s economical wash racks are acid resistant for long life and reduced maintenance.

The stainless steel construction of the Battery Wash Rack units makes them acid resistant for long life and reduced maintenance. These units are also low-profile so they can easily fit into your facility. The MTC wash racks are designed to operate with the MTC H2O-150SS-NOS Water Recirculating System and are available in both Envirowood™ (for overhead applications) and stainless steel roller models (Dimensions 52 7/32" W x 57" L x 55 1/8" H)

All dimensions shown are nominal and subject to change.

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Recirculating Water System.Recirculating Water System

Recirculating Water System With LNC / Ozone Auto Injection System
Controls, filters, analyzes and recirculates water used for cleaning industrial lift truck batteries

The H2O-150SS combines stainless steel construction with ease of operation. You get a constant flow of water that is filtered, pH monitored and recirculated, reducing your environmental concerns.

The system features a single on/off switch and a single recirculating control switch and requires no toxic chemicals.

This recirculating system monitors the pH level, filters, recirculates and neutralizes used battery wash water to keep it clean and ready for reuse.

When combined with an MTC wash cabinet or wash rack, the H2O-150SS-NOS eliminates the need to discharge used water directly into a drain, thereby reducing environmental concerns.

Individual specification sheet available.

Stainless Steel Construction;
Automatic Water Neutralizing System;
12 GPM At 50 PSI Water Flow;
Input Voltage Req. = 120 VAC

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Fork Attachment.Fork Attachment

Features:
• 48" safety chain and hook
• Swivel hook with safety latch

21" Wide x 11 1/2" High;
Includes (1) 4 ft. Safety Chain & Hook and

Used with Battery Handling Beam for battery removal

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page

 

Battery Handling Beam.Battery Handling Beam

The battery handling beam offers a heavy duty non-conductive method of lifting batteries. The non-slip hook design fits snugly into most battery lifting holes. All MTC handling beams are now equipped with MTC's Posi-Latch Safety Mechanism.
Adjustable In 3" Increments

 

Visit www.mtcworldwide.com to view all MTC products

Midwest Power Industries offers the full line of MTC handling equipment.

Please contact: sales@midwestpowerindustries.com for pricing and availability of MTC products.

Back to top of page